Deoxidization catalyst 506HN type is used as gas oxygen purification in nitrogen, carbon dioxide, argon and helium inert gases and other industrial. High-temperature 650 degrees Celsius , not ablation (450 degrees Celsius) highest congener product. Oxygen feed gas impurities absorbed directly by the oxygen scavenger, when the absorption saturation, regeneration through hydrogen reduction can be used repeatedly. The air-fuel ratio feedback system detects oxygen in the exhaust gas, using the oxygen sensor attached in the exhaust manifold.
The deoxidizer is the multiple metal and precious metal - oxide system, mainly used in nitrogen, carbon dioxide, argon, helium and other inert gases and other industrial gases oxygen purification .
Storage Condition: Room temperature. Alumina or catalytic substances coat the grated blueprint of monolith which causes numerous holes.
The inauspicious essences are refined away communicating through the holes. There are two types of monolith; ceramic type and metal type. The thinner the grate is, the more eminent the purification ability becomes.
Oxidation/Deoxidization catalystPerform above two functions at the same time. For the catalyst, the purification rate changes according to the temperature. As shown in the graph, the purification rate is close to 100% and purifies the exhaust gas effectively when the catalyst temperature rises over 40C .
Read more>> Chemical Catalyst Agent
No comments:
Post a Comment